Parasound Halo HINT6 integrert forsterker med DAC

Ny og forbedret!

Parasound HINT 6 er en ytterligere forbedret versjon av den meget populære Halo Integrated. Etter at den originale Halo Integrated Amplifier ble introdusert ble den raskt kjent som "HINT" i Parasound fellesskapet, og navnet benyttes også på den nye modellen. 

Alt i en boks

Med Parasound HINT 6 har John Curl-designet en integrert forsterker på 160 watt per kanal (240 watt @ 4 ohm). HINT 6 har hjemmekino-bypass-funksjon, 2.1-kanals analog subwoofer justering, en dedikert hodetelefon forsterker, samt MM/MC phono-forsterker.
En ESS Sabre32 Reference DAC dekoder et bredt spekter av digitale musikkfiler via to optiske, en koaksial og en ny oppgradert USB-inngang - nå med plug and play-støtte for Windows 10 i tillegg til Mac. Den asynkrone USB 2.0-inngangen støtter PCM opptil 384 kHz / 32-biters DSD256 og DoP DSD bit strømmer. De koaksiale og optiske inngangene godtar PCM opp til 192 kHz / 24-bit.
Parasound HINT 6 har en helt ny Burr-Brown analog volumkontroll som reduserer støynivået, forbedret venstre-høyre separasjon på et hvilket som helst volumnivå. Samme volumkontroll har et lettlest front-display.
Andre kretsforbedringer er en forbedret op-amp i forforsterker delen, forbedret L-R kanalseparasjon, og økt forsterkning for MC- og MM-phono-inngangene.

"I can’t think of another integrated amplifier that offers so many options and has such solid, generous sound. Recommended."
- Stereophile.

Spesifikasjoner for Parasound Halo Hint6:

New Features (Changes from the original Halo Integrated)

• Burr Brown analog resistor ladder volume control

• Dimmable front panel volume display

• Updated USB receiver is Plug and play with Windows 10 and MAC

• An additional optical input (2 total)

• Ball bearing supported solid aluminum volume knob

• Programable default turn on volume setting

• Favorite volume memory with remote control button

• Increased phono stage gain for lower output cartridges

• Improved Left/Right channel separation and balance tracking
• Updated cosmetics with subtle gold highlights

Preamp and DAC Features

• ESS Sabre32 Reference DAC (ES9018K2M)

• Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit

• USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD

• Coax and optical inputs accept PCM up to 192kHz/24-bit

• Analog bass management with high & low pass crossovers

• Home theater bypass input for surround sound integration

• Front panel subwoofer level control

• Dedicated high current headphone amplifier (TI TPA6120)

• Phono input for MM, MC and MI with 100 Ω or 47k Ω load

• Front panel Aux input with automatic +12 dB gain stage

• 5 pairs RCA line level Analog inputs

• 1 pair XLR balanced Analog input

• Balanced XLR and RCA left and right preamp outputs

• 1 balanced XLR and 2 RCA subwoofer outputs

• Bass & treble controls with relay bypass from remote or front panel

• Rear panel IR input and IR loop output jacks

• 12 Volt trigger output

• Back-lit remote control with discrete buttons
• 0.5w standby power consumption meets Energy Star & EU specs

Power Amp Features

• 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)

• 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)

• Power amp circuit topology designed by legendary John Curl

• Direct amplifier input to bypass preamp section

• High bias class A/AB operation

• Oversized shielded toroid power transformer

• Dual-mono power supply and power amplifier

• 40,000uF power supply filter capacitance

• Matched JFET input stages and MOSFET driver stages

• 12 high voltage/high current bipolar output transistors

• Heavy-duty 24k gold-plated 5-way speaker binding posts
• Over temp and short circuit relay protection

Mer info